CertainTeed ProRoc Moisture Resistant Gypsum Board
CT-00160
For use in interior applications where greater than normal moisture resistance is required. Commonly known as moisture resistant gypsum board, M-R board, or green board, ProRoc® Moisture Resistant Gypsum Board products are designed to provide better moisture resistance. All ProRoc® Moisture Resistant products are manufactured with a specially formulated moisture resistant core encased in water resistant 100% recycled paper. This combination provides an effective barrier to moisture penetration. The product is recognizable by its signature green face paper. Also available in Type X for enhance fire resistance Product Data: Thickness: ½” (12.7mm), 5/8” (15.9mm) Lengths: 8’ (2440mm), 9’ (2740mm), 10’ (3050mm), 12’ (3660mm) Widths: 4’ (1220mm) Edges: Tapered Paper: 100% recycled moisture resistant green colored face paper with durable moisture resistant backing paper.
CertainTeed ProRoc® All-Purpose Joint Compound
CT-00550
ProRoc® All-Purpose provides excellent coverage, easy-to-apply formulaProRoc® Brand Joint Compounds are pre-mixed vinyl based compounds that require minimal mixing or thinning. When used properly, ProRoc® Brand Joint Compounds provide a smooth, seamless finish for walls and ceilings
CertainTeed ProRoc® REGULAR
CT-reg01
Consisting of a premium quality, non-combustible gypsum core, ProRoc® Regular gypsum board is encased in a smooth face (front) and back covering of 100% recycled paper. The tapered edges are precision manufactured and paper bound to promote easy joint finishing, making ProRoc® Regular the ideal choice for finishing interior walls and ceilings.
CGC
For more information and a complete product line visit the CGC website.
CGC Compounds
CGC-4807
CGC manufactures a comprehensive line of high quality joint treatment products that are used and trusted by professionals. These products are backed by a reputation for quality and dependability that goes back almost 100 yrs. CGC joint treatment products are available for the Do-it-yourselfer in economical size packaging.
CGC Paper Tape
CGC-328
CGC Drywall Paper Tape is a special fiber tape designed for use with CGC Drywall Compounds in reinforcing joints and corners in gypsum drywall interiors.
CGC Drywall Fiber Tape
CGC-10055
CGC SHEETROCK Gypsum Panels, Regular and Firecode Cores
CGC- 10010
Advantages. Dry construction. Factory-fabricated gypsum panels eliminate excessive moistrue in construction. Low in-place cost. The easily cuty gypsum panels apply quickly, permit painting or other decoration and the installation nof metal or wood trim, almost immediately. Fire protection. The gypsum core will not support compbustion or transmit temperatures greatly in excess of 100 degrees Celsius. Crack resistance. With joints reinforced by one of CGC joint systems, SHEETROCK Gypsum Panels form walls and ceilings that are exceptionally resistant to cracks caused by structural, thermal and hygrometric changes. Nonwarping. Expansion or contraction under normal atmospheric changes is negligible.
CGC SHEETROCK Humitek Gypsum Panels
CGC-10020
SHEETROCK HUMITEK Gypsum Panels have a noncombustible, moisture and mould-resistant gypsum core that is encased in a moisture-resistant, 100 percent recycled blue face and brown back papers. The panels feature tapered long edges for easy finishing. AVOID exposure to temperatures exceeding 52 degrees celcius. Avoid exposure to excessive or continuous moisture before, during and after installation. Not suitable for use in high moisture areas such as tub and shower enclosures, gang showers and other areas subject to direct water exposure. Non-load bearing. COMPLIANCE – with ASTM C36, C1396. Per ASTME136, gypsum core UL-classified as noncombustible. Per ASTM E84 and CAN/ULC S102, flame spread is 20; smoke developed is 0.
Georgia Pacific
For more information and a complete product line visit the Georgia Pacific website
Georgia Pacific DensGlass® Shaftliner
GP-4320
Faced with fiberglass mats, DensGlass® Shaftliner is the premium 1″ gypsum shaftliner in the marketplace. It is a highly mold-resistant shaftliner panel that is ideal for use in moisture-prone vertical and horizontal shaft wall assemblies, stairwell and area separation wall applications.
Georgia Pacific DensGlass® Sheathing
GP-402
It is so weather-resistant that Georgia-Pacific backs it with a 12-Month Weather Exposure Limited Warranty. DensGlass sheathing enhancements announced in 2008 include enhanced fiberglass mats which offer even better wind uplift resistance, make the product easier to handle, and reduce the amount of primer needed for self-adhered membranes. The improved wind load values of DensGlass sheathing enable it to withstand winds in excess of 155 mph – a Category 5 Hurricane – when installed horizontally with the proper screws and spacing. This Georgia-Pacific sheathing is the ideal substrate behind brick, siding, EIFS, stucco and other permanent claddings. It is a superior choice for architects and builders who are concerned about construction schedules that might be delayed by adverse weather conditions. For information about how building with Dens™ Brand fiberglass mat gypsum panels can allow contractors more latitude in scheduling and more options for closing in a structure, faster.
Georgia Pacific DensShield® Tile Backer
GP-389
Forget greenboard and heavy, hard-to-install cement backer board. DensShield backer board is a better option. It features fiberglass mat facings and a unique heat-cured acrylic coating, so it is lightweight, goes up faster and is easier to handle than other tile substrates. What is more, it is engineered to provide exceptional strength and outstanding moisture management as well as superior microbial resistance (based on ASTM Standard D 6329-98).